Just in – A nice S&S Super B body carb just arrived at the chopper shack. Pulled from a running shovel. Ready to run and includes tear drop cleaner, good used filter and throttle cable. Open to possible trades. Ask questions if you got em. More pics at the online.
Tags: cable, chopper parts, chopper shack, chpper blog, running, s&s carb, shovel, super-b, tear drop cleaner, throttle, trades
Uncategorized | admin | January 16, 2012 3:31 pm | Comments Off on Super B w/ Extras – SOLD
Up for sale in the Chopper Shack. 80″ bottom end. Running perfect when pulled and swapped for stroker motor. I pulled heads last week for something else. Cylinders/Pistons look like NEW. Hydro lifters. Old Jammer frame with custom rear axles (boxed in drag bike style). Very slight rake to neck. Seat, rigid oil tank, 35mm front end w/ good chrome, NEW Lowbrow P-nut tank. Good front tire, Junk rear tire for mock-up purposes. Now’s a great time to get started on that winter bike build. Here’s just what you need to get started. Make me an offer.
Tags: 35mm, 80", bike style, bottom end, build, chopper, chopper blog, chopper shack, cylinders, drag bike, front end, front tire, good chrome, great, great time, hydro, junk, lifters, lowbrow, mock up, oil tank, p-nut tank, perfect, pistons, project, rake, rake to neck, rear axles, rear tire, rigid, running, stroker motor, winter, winter bike
Uncategorized | admin | January 7, 2012 3:10 pm | Comments Off on FOR SALE – 80″ Project
Ness Style Digger Fender. 100% American Fiberglass. Super thick stuff. No cracks. Needs a little tlc before running but its not terrible by any means. Got this on trade. Buy it here.
Tags: $100, america, arlen ness, blog, buy it, chopper, chopper bog, cracks, digger, fender, fiberglass, for sale, here, made, means, ness, running, terrible, tlc
Uncategorized | admin | October 31, 2011 11:13 am | Comments Off on Ness Style Digger Fender – for sale
Headed over to the house of the unholy for the typical Thursday night round up. Something made me go. I was gonna sit around and watch TV but I realized this might be the last time to hang out with Gator before he leaves for FL!
Everyone was out. There’s lots to celebrate. New Kevin’s bike is in this issue of ShowClass Mag. I’ve almost got my shovelhead flywheels trued. Blaine has just about everything to start assembling his pan. There’s a swap this Sunday and I picked up a sexy girder from Pete! The bummer was that with Gator splitting, things just won’t be the same. I’m sure Gator will be back in town now and again. Here are a few quick photos I managed to snag while running around the shop.
Enjoy-
Tags: blaine, bum, bummer, celebrate, chopper blog, gator, girder, house of the unholy, in town, last time, new kevin, pan, pete, photos, running, shop, shovelhead, show class magazine, snag, split, thursday night, TV
Uncategorized | admin | October 14, 2011 2:59 am | Comments Off on Later Gator
That’s right. I’ve got a machinery boner and I’m not afraid to share it! Just last weekend, I had a new printing press delivered here to the shop. Built on January 10th, 1967 and placed on my shop floor just 1 day prior to its 42nd anniversary of production. It was clearly meant to be. This mammoth 1-ton fully automated Kluge 10×15 letterpress is naturally referred to as “Killer.” This thing is capable of 700 impressions an hour at its slowest speed and when she’s fully wound up, its like a steam locomotive running through the building! Production capacity tops out around 3 thousand impressions/hour. This thing is gonna save me a world of time and likely save me from loosing a few digits while I’m at it.
Killer… welcome to your new home!
Tags: 10x15, 1967, 3 thousand, 700, afraid, anniversary, blog, boner, capacity, chopper, chopper blog, deliver, digits, hard-on, hour, impressions, killer, kluge, letterpress, locomotive, machinery, mammoth, new machinery, new printing, press, printing, printing press, running, share, shop, slowest, speed, steam, steam locomotive, welcome home, world
Uncategorized | admin | January 12, 2011 12:07 pm | Comments Off on New Machinery Hard-On